KING TOYO Balancer Puller & Installer Tool Set [KT-6036]
Model: KT-6036

Features:
* A professional tool set for balancer replacement.
* Built-in bearing makes balancer replacing job easy and without damage.
* 4-slot puller plate plus 9 threaded adapters fit to balancers on most engines.
* For easy removal of most harmonic balancers and drive pulleys which are press-fitted onto the crankshaft.
* Features a bearing-centered, circular 2/3-way flange and an assortment of metric and fractional bolts and adapters to provide wide coverage
* Heavy-duty, 3/4'' diameter forcing screw is internally threaded to fit the eight adapters to install harmonic balancers

Application:
Puller
1. Select the threaded adapter stud of the correct size and tighten it into the crankdhaft, along with the puller shaft
and the flanged nut mounted on the puller shaft un the position shown.
2. Then mount the puller plater onto the puller shaft with the thrust bearing facing toward the crankshaft.
3. Insert two or three bolts, as needed, in the crankshaft hub or balancer.
4. Remove the balancer by turning the flanged nut. To prevent the puller shaft from turning, use a wrench to hold the threaded adapter or the hex near the pointed end, as necessary. The pointed end of the puller shaft may be used as universal puller, but a wrench may be required on the puller shaft's hex or a threaded adapter

Installer
1. Select the threaded adapter stud of the correct size, and tighten it inot the crankshaft as shown, along with the
puller shaft and the flanged nut mounted on the puller shaft in the position shown.
2. Then mount the puller plate onto the puller shaft with the thrust bearing facing away from the crankshaft. Install the balancer by turning the flanged nut
* The maximum recommended input torque is 150ft lbs. The threads should be lubricated prior to each use

Ciri-ciri:
* Alat profesional untuk penggantian pengimbang.
* Galas terbina dalam menjadikan pengimbang mengganti pekerjaan dengan mudah dan tanpa kerosakan.
* Plat penarik 4 slot ditambah 9 penyesuai berulir yang sesuai dengan pengimbang pada kebanyakan enjin.
* Untuk penyingkiran dengan mudah kebanyakan penyeimbang harmonik dan takal penggerak yang dipasang di atas engkol.
* Menampilkan bebibir 2/3 arah berpusat pada galas dan pelbagai bolt metrik dan pecahan dan penyesuai untuk memberikan liputan yang luas
* Skru penekan berdiameter 3/4 ''tugas berat diikat secara dalaman agar sesuai dengan lapan penyesuai untuk memasang pengimbang harmonik



We always try to keep the item in stock all times
=========================================
 
Order Method :
1. Place your order on our website
2. Via Email/ Whatsapp/ SMS/ Phone Call
3. Cash & Carry any of our branches (Self Collect allowed)
====================================================
 
Contact Information (Whatsapp or Call):
 
Balakong:
603-89623888 
603-89617328
017-3691406
017-3691038
 
Kajang:
603-87366972
016-2338830
 
Setapak:
603-40219399 
016-6613186
016-6616801
         
Gombak:
603-40318686
016-7166820
016-6616081
  
Titiwangsa:
603-40319292
016-866 6203

Sentul:
603-30062238 
012-9380198
016-866 6230
 
Knight Auto Sdn Bhd (Since 1999)(476359-M)  
A Wholly-Owned Subsidiary of Lim Seong Hai Capital Berhad
http://www.knightauto.com.my
=========================================